
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 210 to 230 mm, allowing you to dial back the nominal 230 mm stroke by up to 20 mm during commissioning without adding external stops.
This model features a 12 mm carbon steel piston rod with an M10x1.25 thread, paired with PT (tapered) G1/8 ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It supports a speed range of 30-800 mm/s and utilizes adjustable air cushions at both ends to manage impact deceleration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 210 to 230 mm retract position during line changeovers without swapping out the entire cylinder or adding external stopper blocks.
Adjust the travel window on-site during initial machine commissioning to compensate for mechanical tolerance stack-ups in the fixture design.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires fine-tuning of the retract end position on the fly, such as during product changeovers.
For stroke lengths of 230 mm, the 12 mm rod provides good rigidity, but an external guide is recommended to prevent side-load binding. The rear adjuster acts strictly as a mechanical travel stop and does not hold the load without live air pressure; for true fail-safe load holding, explore the SAIL or BSAI series. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a usable travel window between 210 mm and 230 mm. This stopper only sets the end position; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.