
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X25-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 25mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X25-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 15 to 25 mm, allowing you to dial in the exact retract position during commissioning without external stops.
This variant includes a standard magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches, which seat cleanly into the extruded aluminum barrel's dual sensor grooves. The carbon steel piston rod features an M10x1.25 thread, and the standard PT tapered ports are tapped to G1/8. Adjustable air cushions at both ends manage end-of-stroke impact for this short-travel actuator.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X25-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for short-stroke pick-and-place units where dialing in the exact 15 to 25 mm retract stop during setup prevents workpiece crushing.
Quickly reconfigure end-stops for different product sizes on a packaging line without physically swapping out the actuator body.
Provides reliable 402 N clamping force at 0.5 MPa for small component fixturing, with adjustable travel to accommodate varying part tolerances.
Choose this 32 mm bore model when an application requires pinpoint retract tuning within a 15-25 mm travel window, making it superior to a fixed-stroke SAI for product changeovers or fine machine setup. The rear adjuster acts strictly as a mechanical stop to set the end position; it does not hold the load dynamically without live air pressure. For true fail-safe load holding, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder.
As a dimensionally interchangeable ISO 15552 cylinder, it uses a reduced mounting accessory set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets (omitting FB, CA, CB, and CR). When specifying a replacement, verify the 32 mm bore, 25 mm stroke, 10 mm adjustment range, PT G1/8 port, and the -S magnet requirement.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
The rear adjusting screw acts as a mechanical stopper that trims the effective stroke by up to 10 mm. For a nominal 25 mm stroke, this creates a usable travel window of 15 to 25 mm, allowing precise end-position tuning at commissioning without adding external stops.
At a 0.5 MPa operating pressure, the SAIJ32X25-10-S generates a push (extend) force of 402 N and a pull (retract) force of 345 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.