verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X35-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke35 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$58.84 $66.34Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10

The AirTAC SAIJ32X35-10 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 35mm nominal travel by up to 10mm. This yields a precise 25-35mm usable stroke window, ideal for fine-tuning end positions at commissioning without swapping hardware.

The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches. Unlike a standard fixed-stroke SAI unit, the integrated rear stopper lets you adapt to product changeovers on the fly. The adjuster acts purely as a travel stop and works alongside the standard air cushions, meaning it will not hold a load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X35-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke35 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×35Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10 Is Used

tune

Machine Setup & Commissioning

Dial in the exact 25-35mm end-of-stroke position during initial machine build without machining external spacers or swapping cylinders.

settings_input_component

Product Size Changeover

Quickly retract the stroke stopper by up to 10mm to accommodate slightly shorter workpieces on a modular assembly line.

precision_manufacturing

Variable End-Stop Clamping

Apply 402N of clamping force at 0.5MPa while fine-tuning the contact point to prevent workpiece deformation.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10 the Right Cylinder?

If your process needs slightly more thrust, stepping up to the 40mm bore yields 628N, but the SAIJ32X35-10 is optimal for tight machinery layouts. The carbon steel piston rod with an M10x1.25 thread provides a robust interface for small actuators, though even at this short stroke, external guiding is recommended for offset loads.

Because the rear adjuster is a stop and not a lock, this cylinder cannot maintain position or hold a load without continuous air pressure. If your machine requires true load-holding without live air, consider the SAIL pneumatic lock or BSAI clamp-lock series. This SAIJ model uses PT tapered ports and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10 FAQ

It operates at speeds between 30 and 800mm/s, supported by 27mm cushions at both ends.

The rear adjuster screw allows you to shorten the 35mm nominal stroke by up to 10mm, creating a 25-35mm usable travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X35-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.