
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X35-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X35-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. Because of the 20mm adjustment code on a 35mm nominal stroke, you gain a usable travel window of 15 to 35mm, allowing precise end-position tuning without swapping hardware.
This unit includes a magnet for position sensing and works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting. The 12mm carbon steel rod with an M10x1.25 thread handles moderate side loads well, while the adjustable rear stopper acts purely as a travel end-deceleration device, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position during machine commissioning without adding external mechanical stops.
Quickly adapt the travel window from 35mm down to 15mm on packaging lines handling varying material sizes.
Use the integrated magnet with DMSE electronic sensors to confirm exact stroke endpoints after adjustment.
Select this 32mm bore adjustable-stroke cylinder when your machine setup requires exact end-stop calibration during commissioning or product changeover. The SAIJ32X35-20-S is dimensionally interchangeable per ISO 15552, featuring a 35mm stroke, 20mm adjustment range, PT port, and a magnet for CMSE/DMSE sensors.
Remember that the rear adjuster and air cushions only set the travel end; they do not hold a load without live air pressure. For positive load-holding, consider an external rod lock or the AirTAC SAIL/BSAI series. For this 35mm stroke, side-loading is minimal, but an external guide is still recommended for heavy loads.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you mechanically shorten the effective stroke by up to 20mm. This creates a usable travel window of 15 to 35mm, allowing you to fine-tune the end position at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.