verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X400-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke400 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$90.95 $98.45Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S

The AirTAC SAIJ32X400-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. An integrated magnet allows for position sensing with CMSE reed or DMSE electronic switches.

This extruded aluminum profile cylinder omits the FB, CA, CB, and CR mounts, utilizing a focused mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The PT tapered port thread and carbon steel rod are standard, while the rear adjuster acts strictly as a travel stop to dial in the retract end position during commissioning without adding external stops.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke400 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S Is Used

tune

End-Position Tuning

Dial in the exact retract distance within the 370-400mm window during machine commissioning without swapping out the entire actuator.

settings_input_component

Product Changeover

Quickly adjust the stroke by up to 30mm to accommodate slightly different product sizes on a packaging line.

conveyor_belt

Variable End Stops

Use the rear stopper screw to set precise stopping points for delicate items moving along a conveyor system.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S the Right Cylinder?

Choose this 32mm bore when an application requires precise end-position tuning, as its 370-400mm adjustable travel window allows for on-the-fly adjustments during product changeovers. Because the nominal stroke is 400mm, an external guide is recommended to handle side loads, as the 12mm rod and M10x1.25 thread are best suited for lighter axial loads.

The rear screw adjuster and air cushions only set the travel end and decelerate the load; they do not hold the position without live air. For load-holding requirements without pneumatic pressure, consider an AirTAC SAIL or BSAI cylinder. To match this ISO 15552 interchangeable cylinder exactly, specify the 32mm bore, 400mm stroke, 30mm adjustment, PT port, and the -S magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S FAQ

At 0.7 MPa, the push force increases to 563N.

The rear adjuster screw allows you to shorten the effective stroke by up to 30mm from the 400mm nominal length, providing a usable travel window of 370-400mm. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X400-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X400-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.