
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X425-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 425mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X425-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated rear stopper allows you to fine-tune the effective travel, providing a usable window of 405 to 425 mm without requiring external stops.
This 32mm bore actuator uses a G1/8 port and a 12mm carbon steel rod with an M10x1.25 thread. Because the stroke extends to 425mm, an external guide is recommended to prevent excessive side-loading on the rod. The extruded aluminum barrel includes sensor grooves on both sides, directly supporting AirTAC CMSE reed and DMSE electronic switches for precise end-of-stroke detection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X425-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 405-425mm retract distance during product size changes without swapping the cylinder or adding mechanical shims.
Set precise sorting positions on a conveyor line by adjusting the rear stopper to accommodate different package depths.
Fine-tune the end-of-stroke position during commissioning to perfectly seat components without over-traveling.
The adjustable stroke is selected over a fixed SAI cylinder when commissioning requires fine-tuning the retract distance by up to 20mm during machine setup or product changeover. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider an external rod lock or the AirTAC SAIL series.
To match this exact ISO 15552 interchangeable replacement, specify: 32mm bore, 425mm nominal stroke, 20mm adjustment range, PT tapered port threads, carbon steel rod, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the nominal 425mm stroke by up to 20mm, creating a usable travel window of 405 to 425mm. This allows you to set the exact retract end-position at commissioning without changing the physical cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.