
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X55-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X55-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 45-55 mm usable travel window, allowing you to dial back the 55 mm nominal stroke by up to 10 mm during commissioning.
This unit includes a standard magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches. The extruded aluminum barrel features sensor grooves on both sides, and the carbon steel rod with an M10x1.25 thread handles moderate side loads. It uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45 to 55 mm retract position during machine commissioning without adding external physical stops.
Quickly adapt the cylinder's travel window on packaging lines when handling slightly different package sizes.
Use the 10 mm adjustment range to fine-tune the end-of-stroke contact force for delicate pressing tasks.
An adjustable stroke is ideal for variable end-stops or machine changeover without swapping cylinders, unlike a fixed-stroke SAI. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air—use SAIL or BSAI for pneumatic locking. For ISO 15552 dimensional replacement, match the 32 mm bore, 55 mm stroke, 10 mm adjuster, PT G1/8 port, and -S magnet.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the effective stroke by up to 10 mm, creating a 45-55 mm usable travel window. It functions as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.