
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-50 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and a 600mm stroke. Equipped with a rear stroke adjuster, it provides a usable travel window of 550-600mm, allowing you to dial back the retract position by up to 50mm during commissioning.
This extruded aluminum barrel design includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The carbon steel piston rod features an M10x1.25 thread, and the rear adjuster functions purely as a mechanical stop to set end-of-travel deceleration, not as a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position by up to 50mm when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders.
Set precise retract limits for indexing actuators on a conveyor without bolting on external hard stops or shims.
Fine-tune the end-of-stroke position during initial machine commissioning to perfectly time the 600mm travel sequence.
Choose this 32mm bore model when you need precise retract positioning that a fixed-stroke SAI cylinder cannot provide. Because this cylinder has a 600mm stroke, the unsupported length of the 12mm rod makes it susceptible to side-loading; always use an external guide to prevent rod binding and premature seal wear.
The rear adjuster allows variable end-stops for product changeovers but will not hold a load without live air pressure. For true fail-safe load holding, consider an SAIL air-released lock or a BSAI clamp-lock cylinder. As a dimensionally interchangeable ISO 15552 unit, it matches standard mounting footprints using the Basic, FA, LB, TC, FTC, TCM1, and TCM2 interface set, omitting FB, CA, CB, and CR brackets.
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster acts as a mechanical stop that lets you shorten the 600mm nominal stroke, providing a usable travel window of 550-600mm. It sets the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.