
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X65-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X65-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that lets you dial back the 65mm nominal travel by up to 10mm, creating a 55-65mm usable positioning window. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches if a magnet is added later.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping out the cylinder or adding external stops. The rear adjuster functions purely as a travel stop and, alongside the variable air cushions, does not hold the load without live air pressure. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X65-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 55-65mm travel needed when switching between slightly different product sizes on a packaging line.
Adjust the rear stopper by up to 10mm during machine setup to perfect the end position without installing external stops.
Set precise retract positions for light-duty assembly tasks using the 12mm carbon steel rod and M10x1.25 thread.
The SAIJ32X65-10 is selected over a fixed-stroke SAI when a machine setup requires variable end-stops for product changeovers. For load-holding without continuous air pressure, this cylinder is insufficient as the adjuster is only a stop; consider the SAIL or BSAI series instead. To match this ISO 15552 interchangeable cylinder, specify a 32mm bore, 65mm stroke, 10mm adjustment, PT tapered port thread, and no magnet.
AirtacDistr lists every SAIJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa, it delivers up to 82kgf.
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the 65mm nominal stroke by up to 10mm. This creates a 55-65mm usable travel window for fine-tuning end positions at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.