verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X650-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke650 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$117.93 $125.43Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S

The AirTAC SAIJ32X650-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because it carries the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic sensors in the dual-side barrel grooves.

This specific SKU trims the 650mm nominal stroke back by up to 40mm, creating a 610-650mm usable travel window. This built-in adjuster acts purely as a mechanical stop for end-position tuning during commissioning; it does not hold the load without live air pressure. For position-holding requirements, consider the SAIL or BSAI series instead.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke650 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×650Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S Is Used

tune

Machine Changeover

Dial in the 610-650mm travel window during product size changes without physically replacing the cylinder or reworking the fixture.

precision_manufacturing

End-Position Tuning

Fine-tune the retract end-stop at commissioning to absorb mechanical tolerances, ensuring precise positioning of the 12mm rod.

settings_input_component

Adjustable End-Stop Setup

Use the 40mm rear adjuster screw to set variable end-stops for testing different stroke lengths on a new assembly fixture.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S the Right Cylinder?

Choose this 32mm bore when you need precise end-position tuning without swapping cylinders or adding external stops. If your application requires greater thrust, stepping up to the 40mm bore increases your 0.5 MPa push force to 628N.

This model uses a PT G1/8 port and supports the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Because the 650mm stroke is long relative to the 12mm rod diameter, you must use an external guide to prevent excessive side-loading and premature wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S FAQ

The maximum operating pressure is 1.0 MPa.

The rear adjuster screw lets you shorten the 650mm nominal stroke by up to 40mm, giving a usable travel window of 610-650mm. This adjuster functions as a travel stop for fine-tuning, not as a lock to hold the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X650-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.