
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X700-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X700-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 700 mm nominal stroke that can be fine-tuned backward by up to 40 mm, yielding a usable travel window of 660-700 mm. This allows precise end-position calibration during commissioning without adding external stopper blocks. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
It uses a G1/8 port, a 12 mm carbon steel rod with an M10x1.25 thread, and features variable air cushions at both ends. The rear adjuster acts purely as a travel stop for deceleration and positioning, meaning it cannot hold a load dynamically without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X700-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 660-700 mm travel window during format changes on a packaging line, using the rear screw to set new end positions rapidly without changing hardware.
Fine-tune the clamping reach on long-stroke machining fixtures, ensuring the 12 mm rod hits the exact 0.5 MPa thrust point without external shims.
Adjust the stroke length on a conveyor sorting gate by up to 40 mm to accommodate different package sizes on the fly during production runs.
The adjustable stroke is ideal for machine setups that undergo frequent product changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder. To match this exact configuration for an ISO 15552 replacement, specify the 32 mm bore, 700 mm stroke, 40 mm adjustment, PT tapered port threads, and no magnet.
Because this model features a 700 mm stroke, the 12 mm rod requires external guiding to prevent excessive side-loading and binding over that extended distance. While the integrated air cushions and rear stopper manage end-of-travel deceleration, they do not function as a locking mechanism. For applications requiring true load-holding without live air pressure, consider an external pilot-operated check valve or explore the SAIL locking cylinder series.
Quick checklist
If operating at 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the 700 mm nominal stroke by up to 40 mm, creating a usable travel window of 660-700 mm. It acts as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.