
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X800-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X800-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end position without adding external stops. With a nominal 800 mm stroke and a 50 mm adjustment range, it provides a usable travel window of 750-800 mm.
This variant includes a carbon steel rod and a -S magnet for position sensing. The extruded aluminum barrel features sensor grooves on both sides to accept CMSE reed or DMSE electronic switches. Because the 800 mm stroke is long relative to the 32 mm bore, an external guide is recommended to manage side loads and prevent rod deflection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X800-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 750 to 800 mm travel distance during machine commissioning to accommodate different product sizes without installing external physical stops.
Quickly shorten the retract stroke by up to 50 mm during production line changeovers to handle varying package dimensions while maintaining ISO 15552 mounting dimensions.
The adjustable stroke is ideal for product changeovers, letting you dial back the travel by up to 50 mm during commissioning rather than swapping the entire cylinder. For any fixed-position requirements, the standard SAI series offers the same footprint without the adjuster.
Remember that the rear adjuster on this SAIJ model acts only as a travel stop and does not hold the load without live air pressure. If your application requires true load-holding on a 32 mm bore, consider the SAIL pneumatic lock or BSAI clamp-lock cylinder. This unit features a PT tapered port thread and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting interfaces.
Quick checklist
It operates at speeds between 30 and 800 mm/s, driven by its G1/8 port.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 50 mm, creating a 750-800 mm usable window. It decelerates the travel end but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.