
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X85-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X85-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 85 mm stroke by up to 40 mm. This creates a highly flexible 45-85 mm usable travel window, perfect for fine-tuning end positions during commissioning without swapping hardware.
This unit includes a piston magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches. It features a 12 mm carbon steel rod with an M10x1.25 thread, G1/8 ports, and 27 mm cushions at both ends. The mounting interface covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X85-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45-85 mm end position during line changeovers without machining external stopper blocks.
Fine-tune the retract distance on packaging or sorting machines to adapt to varying product sizes on the fly.
Trim the effective stroke by up to 40 mm during initial commissioning to perfect timing and avoid mechanical interference.
Choose this 32 mm bore adjustable cylinder when your machine setup requires variable end-stops or frequent product changeovers, replacing the need for a fixed-stroke SAI cylinder and external stops. Keep in mind the rear adjuster acts only as a travel stop and does not hold the load without live air; for true fail-safe holding, consider the SAIL or BSAI series.
To match this ISO 15552 cylinder, verify your bore size, the 85 mm nominal stroke, the 40 mm adjustment range, PT tapered G1/8 ports, and the -S magnet requirement for CMSE or DMSE sensors.
Quick checklist
The rear adjuster screw lets you shorten the 85 mm nominal stroke by up to 40 mm, providing a usable travel window of 45-85 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.