
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, enabling you to dial back the 900mm nominal travel to a precise 825-900mm window during commissioning. A standard carbon steel rod and tapered PT port threads are included.
Because the stroke is 900mm, the 12mm rod diameter and M10x1.25 rod thread will not support significant side loads without an external guide. This unit includes a magnet for position sensing, working seamlessly with AirTAC CMSE reed and DMSE electronic switches mounted into the dual-side sensor grooves. The rear screw acts purely as a travel stop for end-position tuning, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 825-900mm travel distance during product size transitions without physically replacing the cylinder.
Use the rear adjusting screw to set precise retract positions on the fly for multi-format assembly lines.
Handles 900mm extended travel tasks where fine-tuning the final end-position prevents mechanical binding.
If your application requires greater force, stepping up to the 40mm bore yields 628N at 0.5MPa. The adjustable stroke is ideal for machine changeover, allowing you to fine-tune the travel distance without swapping the cylinder or adding external stops.
For an exact ISO 15552 replacement, match the 32mm bore, 900mm stroke, 75mm adjustment, PT port threads, and the -S magnet option. Note that the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. If the machine loses air, neither the rear adjuster nor the standard air cushions will hold the load; you must specify a SAIL or BSAI lock model for fail-safe holding.
Quick checklist
At 0.9MPa, the push force increases to 724N.
The rear adjuster screw lets you mechanically shorten the 900mm stroke by up to 75mm, providing a usable travel window of 825-900mm for fine-tuning end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.