Airtac AirTAC B06-SUD Battery Dedicated Standard Cylinder B06-SUD100X75
AirTAC B06-SUD100X75 Battery-Optimized Standard Cylinder Specifications
- Series: B06-SUD (Special Use for Battery Industry)
- Bore size: Ø100mm
- Stroke: 75mm (Customizable 25-500mm)
- Operating pressure: 0.05-1.0 MPa
- Cushioning: Adjustable rubber buffer + shock absorber
- Mounting type: Basic foot mounting (ISO 15552 compatible)
- Rod thread: M20×1.5 (Stainless steel)
- Piston material: Die-cast aluminum with hard anodizing
- Seal type: Double-lip NBR seals with dust wiper
- Temperature range: -20℃ to 80℃ (Dry air required below 0℃)
- Lubrication: Pre-lubricated (Use ISO VG32 turbine oil if needed)
- Weight: 3.8kg ±2% (Without accessories)
- Dimensions: 225mm(L) × 125mm(W) × 125mm(H) (Extended length)
- Repeat accuracy: ±0.5mm
- Max speed: 500mm/s (With cushion engaged)
Engineered for lithium battery production lines, this corrosion-resistant cylinder features low-friction seals and anti-sparking construction ideal for explosive atmospheres. The dual-sensor slots (T-slot & square slot) support magnetic or mechanical position detection. Optimized for vertical Z-axis movements with reduced stick-slip effect.
- Battery cell stacking mechanisms
- Electrode sheet punching/pressing
- Cap assembly in battery module lines
- Electrolyte filling station automation
- Battery pack compression testing rigs
Maintenance protocol:
Apply silicone grease (ASG-175) quarterly in high-cycle applications.
Use clean dry air with dew point -20℃ below ambient. Avoid lateral
loads exceeding 150N. Align using guide rails for strokes >300mm.
| Property | Property Value |
|---|---|
| sku | B06-SUD100X75 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.