This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is B06-SAUD40X100S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the B06-SAUD40X100S in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S
The AirTAC Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S is a double-acting profile-type standard cylinder with a Ø40mm bore and 100mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the B06-SAUD40X100S, which matches its bore, stroke, force and mounting.
- BoreØ40 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.25
- StatusDiscontinued → B06-SAUD40X100S
About the Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S
The AirTAC B06-SUD40X100S is a double-acting, double-rod profile cylinder where the "B06-" prefix designates it as a battery-manufacturing dedicated variant, mechanically identical to the standard SUD40X100S. A rod exits both ends on a single piston, meaning push and pull forces are equal both ways at 528 N @0.5 MPa, 739 N @0.7 MPa, and 950 N @0.9 MPa. The extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it features a 1/4" port, M12x1.25 rod thread, and a 21 mm adjustable cushion at each end.
This discontinued model is fully replaced by the drop-in SAUD40X100S, which retains the exact bore, stroke, force, port, and FA/LB mounting. The double-rod design provides anti-rotation stability and allows the back rod to carry a sensor cam for legacy CS1-B/DS1-B switches (the SAUD replacement uses current CMSG/DMSG/EMSG sensors). For sizing, the computed safe working load is ~317 N (60% of the 528 N @0.5 force), yielding a vertical lift capacity of ~27 kg with a 2:1 margin.
Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S Technical Specifications
| Model | Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | B06-SAUD40X100S |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The B06-SAUD40X100S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
The B06-SAUD40X100S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S Is Used
Cell Stacking Assembly
Applies equal both-ways force for precise pressing and separation during prismatic cell stacking operations.
Module Handling Transfer
Uses the dual-rod anti-rotation feature to push battery modules along conveyors without twisting under offset loads.
Tab Welding Clamp
Drives two welding tools simultaneously from opposite ends, maintaining parallel clamping on battery tabs.
Replacing the Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S with the B06-SAUD40X100S
To replace the discontinued B06-SUD40X100S, drop in the SAUD40X100S—it matches the 40mm bore, 100mm stroke, 1/4" port, and FA/LB mounting exactly. When sizing both ways, verify force against neighboring bores (32mm or 50mm), but ensure equal-both-ways force fits your load. Choose a double-rod cylinder when anti-rotation or driving two tools is required. The -S magnet means legacy CS1-B/DS1-B sensors; upgrade to CMSG/DMSG/EMSG for the SAUD. For stroke >=300, check side-load limits. Note: air cushions only decelerate; use an external rod lock for load holding.
Replacement checklist
- ✓ Same bore / stroke → B06-SAUD40X100S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X100S FAQ
Yes, the B06-SUD40X100S (battery-manufacturing dedicated SUD40X100S) is discontinued. The exact drop-in replacement is the SAUD40X100S, which matches the bore, stroke, force, and 1/4" port. The SAUD also offers the SAUF built-in-valve variant the SU line lacked.
Force is equal both ways at 528 N @0.5 MPa, 739 N @0.7 MPa, and 950 N @0.9 MPa. The bore is 40mm with a 1/4" port, 16mm rod, M12x1.25 thread, and 21mm cushions. Safe working load is ~317 N.
Related AirTAC SAU Cylinders
Request a Quote for the B06-SAUD40X100S
Send us the quantity and destination. We confirm price, stock and lead time on the B06-SAUD40X100S replacement — usually within 7-8 hours.