Airtac AirTAC B06-SUD Battery Dedicated Standard Cylinder B06-SUD40X800S
AirTAC B06-SUD40X800S Battery-Optimized Standard Cylinder Specifications
- Model: B06-SUD40X800S
- Type: Single-acting spring return (battery-driven systems optimized)
- Bore size: 40mm (±0.05mm precision honed)
- Stroke: 800mm (adjustable cushioning)
- Operating pressure: 0.05–0.9 MPa (low-pressure operation enabled)
- Temperature range: -30℃ to 100℃ (extended thermal tolerance)
- Cushion type: Adjustable rubber bumper + air cushion
- Mounting: Standard ISO/VDMA front flange (MF1) & rear foot mounting (FB1)
- Port size: G1/8 (BSPP thread standard)
- Material: Aluminum alloy barrel (hard anodized) + stainless steel piston rod
- Seal material: Heat-resistant NBR (nitrile) with wear-resistant ring
- Weight: 5.8kg (including mounting hardware)
- Dimensions: 948mm(L) × 52mm(W) × 52mm(H) (extended stroke length)
- Protection rating: IP67 (dust/water resistant)
- Voltage compatibility: 12-24VDC systems (low-power design)
High-efficiency pneumatic cylinder engineered for battery-powered automation systems, featuring reduced friction design (≤0.003 dynamic friction coefficient) and 30% lower air consumption than standard models. The chrome-plated piston rod incorporates a multi-layer sealing system for maintenance-free operation up to 2,000km travel distance.
- Mobile battery-powered assembly robots
- Lithium battery formation equipment actuators
- Solar-powered agricultural sorting mechanisms
- Portable medical device automation
- Electric vehicle manufacturing fixtures
Installation protocol:
Requires horizontal mounting alignment (±2° tolerance) with support brackets every 500mm stroke length.
Lubricate with ISO VG32 hydraulic oil (non-detergent) during commissioning.
| Property | Property Value |
|---|---|
| sku | B06-SUD40X800S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.