Airtac AirTAC B06-SUD Battery Dedicated Standard Cylinder B06-SUD50X150S
AirTAC B06-SUD50X150S Battery Production Standard Cylinder Specifications
- Model: B06-SUD50X150S
- Series: B06-SUD (Battery Special Series)
- Bore size: Ø50 mm
- Stroke: 150 mm
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable rubber buffer
- Mounting type: Basic type (MF1) with optional foot mounting (MF2)
- Port size: G1/8 (Rc1/8 optional)
- Cylinder material: Aluminum alloy with anti-corrosion treatment
- Piston rod material: Stainless steel (SUS304) with hard chrome plating
- Seal material: NBR (Nitrile) with optional FKM (Fluorocarbon)
- Temperature range: -20℃ to 80℃
- Weight: 1.53 kg (without accessories)
- Dimensions:
- Total length: 248 mm (stroke 150 + end caps)
- Body diameter: Ø50 mm
- Mounting hole spacing: 32 mm (front) / 40 mm (rear)
- Protection rating: IP65 (standard), IP67 (optional)
- Lubrication: Pre-lubricated (Grease-free operation available)
High-precision cylinder specifically engineered for battery manufacturing environments, featuring enhanced corrosion resistance against acidic/alkaline atmospheres. The chrome-plated piston rod and special surface treatment prevent particle generation critical in cleanroom applications. Includes magnetic piston for sensor compatibility.
- Lithium battery cell stacking mechanisms
- Electrode plate handling in battery assembly lines
- Battery formation equipment actuators
- Cap assembly machines for battery terminals
- Cleanroom battery packaging systems
Operation note:
Requires dry air supply (pressure dew point -20℃ below ambient) to prevent electrolyte contamination.
Recommend using with AirTAC AL40-02D air dryer in humid environments.
Special maintenance:
Use only alcohol-based cleaners (no ketones). Replace seals every 500,000 cycles
in high-alkali environments. Avoid lateral loads exceeding 30N.
| Property | Property Value |
|---|---|
| sku | B06-SUD50X150S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.