Airtac MID Series Double Rod Mini Cylinder MID16X10S
The AirTAC Airtac MID Series Double Rod Mini Cylinder MID16X10S is a genuine double acting, double rod round-body mini air cylinder with a Ø16mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MID Series Double Rod Mini Cylinder MID16X10S
Delivering 86.4 N of thrust at 0.5 MPa in both directions, the AirTAC MID16X10S is a stainless-steel round-body mini cylinder built for double-acting operation. Because a Ø6 mm piston rod exits both end covers, extend and retract forces are perfectly equal. This twin-rod design inherently resists rotation and side loads, providing steadier guiding without an external guide for light jobs. The back rod end remains free to trip a switch or carry a stop.
The riveted stainless barrel and rod offer reliable mild corrosion and washdown resistance. Featuring a 10 mm stroke and a 1/8" port, it uses the ISO 6432 mounting interface for standard mini brackets. The -S suffix denotes a built-in piston magnet for CMSG, DMSG, or EMSG switches. Based on the 0.5 MPa rating, expect a safe working load of roughly 52 N, or a vertical lift of about 4.4 kg with a 2:1 margin.
Airtac MID Series Double Rod Mini Cylinder MID16X10S Technical Specifications
| Model | Airtac MID Series Double Rod Mini Cylinder MID16X10S |
|---|---|
| Series | MID ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MID Series Double Rod Mini Cylinder MID16X10S
| MID | ISO 6432 round-body mini cylinder (double-rod). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MID Series Double Rod Mini Cylinder MID16X10S Is Used
Symmetric Shuttle Transfer
Drives a lightweight 4 kg payload back and forth with equal 86.4 N force, using the through-rod to push and pull a shuttle without rotation.
Back-Rod Switch Tripping
Uses the exposed rear rod end to physically trip a limit switch or flag, confirming the 10 mm stroke completion while the front rod performs the main work.
Guided Component Seating
Steadily presses small parts into place; the twin Ø6 mm rods resist side load and twisting during the guided seating motion.
Is the Airtac MID Series Double Rod Mini Cylinder MID16X10S the Right Cylinder?
If 86.4 N at 0.5 MPa is insufficient, step up to the MID20 (131.9 N); if you need less force, the MID12 (42.4 N) is the next size down. The twin-rod architecture is ideal here for anti-rotation, back-rod switch tripping, or driving a symmetric shuttle. For position holding, note that the piston drifts on air loss and the fixed TPU bumpers only decelerate the stroke end, so add an external rod lock or pilot check valve for suspended loads. Mount via LB, FA, or TC (SDB is unavailable), and use CMSG/DMSG/EMSG sensors enabled by the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MID Series Double Rod Mini Cylinder MID16X10S FAQ
It delivers equal force both ways because the double-rod design uses the rod-side area on both faces. Thrust is 86.4 N at 0.5 MPa, 120.9 N at 0.7 MPa, and a maximum theoretical 17.6 kgf at 1.0 MPa. The 1/8" port supplies air at speeds of 30-800 mm/s.
Yes to sensors: the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. For holding: no, the piston drifts on air loss and the fixed TPU bumpers only soften the stroke end; use an external rod lock or pilot check valve to hold suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MID Series Double Rod Mini Cylinder MID16X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.