Airtac MID Series Double Rod Mini Cylinder MID16X15
The AirTAC Airtac MID Series Double Rod Mini Cylinder MID16X15 is a genuine double acting, double rod round-body mini air cylinder with a Ø16mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MID Series Double Rod Mini Cylinder MID16X15
Delivering 86.4 N of thrust at 0.5 MPa in both directions, this AirTAC double-acting mini cylinder features a through-rod that exits both end covers. Because the rod occupies each side, extend and retract forces are perfectly equal, while the twin-rod construction naturally resists rotation and side loads for steadier guiding without an external guide. The stainless-steel round barrel and piston rod offer mild corrosion and washdown resistance.
Built to the ISO 6432 mounting interface for easy bracket integration, it uses a 1/8" port and a 6 mm piston rod with an M6x1.0 male thread. This specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors without upgrading to the -S variant. For sizing context, its 86.4 N output yields a safe working load of about 52 N, or roughly 4.4 kg of vertical lift with a 2:1 margin.
Airtac MID Series Double Rod Mini Cylinder MID16X15 Technical Specifications
| Model | Airtac MID Series Double Rod Mini Cylinder MID16X15 |
|---|---|
| Series | MID ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MID Series Double Rod Mini Cylinder MID16X15
| MID | ISO 6432 round-body mini cylinder (double-rod). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MID Series Double Rod Mini Cylinder MID16X15 Is Used
Symmetric Shuttle Transfer
Pushing a small 4 kg jig back and forth between two stations, utilizing the 86.4 N equal force to ensure consistent travel speed and push strength in both directions.
Back-Rod Switch Tripping
Using the exposed rear rod end to mechanically trip a limit switch at 15 mm stroke, providing a physical confirmation of retraction without needing an internal magnet.
Anti-Rotation Pin Insertion
Pressing small dowel pins where the twin 6 mm rods prevent the tooling from twisting under side load, keeping the insertion perfectly straight within a tight fixture.
Is the Airtac MID Series Double Rod Mini Cylinder MID16X15 the Right Cylinder?
If you need slightly less force, the MID12X15 provides 42.4 N at 0.5 MPa; stepping up to the MID20X15 yields 131.9 N. The 16 mm bore is an excellent middle ground for compact automation. The through-rod design is ideal when you need to mount a stop or trip a switch on the back end, or drive a second load simultaneously. Foot (LB), flange (FA), and trunnion (TC) mounts are available, but the SDB pivot-block is not offered on this double-rod variant.
Keep in mind that the fixed TPU bumper pads only soften the stroke end and do not lock the piston. If air pressure drops, the cylinder will drift and cannot hold a load vertically without an external rod lock or pilot-operated check valve. Additionally, because this exact unit has no -S suffix, it will not accept magnetic position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MID Series Double Rod Mini Cylinder MID16X15 FAQ
Because it is a double-rod cylinder, force is equal both ways: 86.4 N at 0.5 MPa and 120.9 N at 0.7 MPa, with a maximum theoretical force of 17.6 kgf at 1.0 MPa. It operates at 30-800 mm/s, uses a 1/8" port, and accepts air filtered to 40 um.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG sensors. You would need the -S variant for sensing. However, the stainless-steel double-rod build still provides excellent anti-rotation stability and mild washdown resistance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MID Series Double Rod Mini Cylinder MID16X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.