Airtac MID Series Double Rod Mini Cylinder MID16X175
The AirTAC Airtac MID Series Double Rod Mini Cylinder MID16X175 is a genuine double acting, double rod round-body mini air cylinder with a Ø16mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MID Series Double Rod Mini Cylinder MID16X175
Delivering 86.4 N of thrust at 0.5 MPa in both directions, the AirTAC MID16X175 is a double-acting, through-rod mini cylinder. Because a Ø6 mm piston rod exits both end covers of the stainless-steel round barrel, the extend and retract areas are identical, yielding equal force and high resistance to side load. This 175 mm stroke unit drops right into ISO 6432 mini-cylinder mounting interfaces, making it a direct fit for standard brackets and clevises.
The twin-rod architecture eliminates the need for an external guide in light-duty tasks, while the rear rod end is free to trip a switch or carry a stop. With a 1/8" port and fixed TPU bumper pads, it handles speeds of 30-800 mm/s. For sizing, this bore provides a safe working load of roughly 52 N, meaning it can vertically lift about 4.4 kg with a 2:1 safety margin. Note that this SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MID Series Double Rod Mini Cylinder MID16X175 Technical Specifications
| Model | Airtac MID Series Double Rod Mini Cylinder MID16X175 |
|---|---|
| Series | MID ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MID Series Double Rod Mini Cylinder MID16X175
| MID | ISO 6432 round-body mini cylinder (double-rod). |
|---|---|
| 16 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MID Series Double Rod Mini Cylinder MID16X175 Is Used
Guided Push Stations
The twin-rod design resists rotation, providing a steady 86.4 N guided push for seating small components without needing an external guide rail.
Symmetric Shuttle
With equal force both ways, this cylinder moves a 175 mm shuttle carriage back and forth smoothly, driving loads from either rod end simultaneously.
Mechanical Switch Trip
The rear protruding rod end acts as a built-in mechanical flag to trip an external limit switch at the end of the stroke, saving space.
Is the Airtac MID Series Double Rod Mini Cylinder MID16X175 the Right Cylinder?
When sizing this 16 mm bore, consider the 12 mm option (42.4 N at 0.5 MPa) for lighter duties, or step up to the 20 mm bore (131.9 N) if you need more push. The 175 mm stroke sits well within the 500 mm maximum standard stroke. The double-rod design shines when you need anti-rotation stability or want to drive a second load from the back rod end. Keep in mind that the TPU bumpers only soften the end of stroke; they do not lock the piston, so an external rod lock or pilot check valve is required to hold a load on air loss. Mounting options include LB foot, FA flange, and TC trunnion (the SDB pivot-block is not offered), and because this specific SKU has no -S magnet, it cannot accept position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MID Series Double Rod Mini Cylinder MID16X175 FAQ
It delivers an equal force in both directions because of the double-rod design: 86.4 N at 0.5 MPa, 120.9 N at 0.7 MPa, and a maximum theoretical output of 17.6 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG, or EMSG sensors. You would need the -S variant for magnetic sensing. The stainless steel build does provide mild washdown resistance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MID Series Double Rod Mini Cylinder MID16X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.