Airtac MID Series Double Rod Mini Cylinder MID16X25S
The AirTAC Airtac MID Series Double Rod Mini Cylinder MID16X25S is a genuine double acting, double rod round-body mini air cylinder with a Ø16mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MID Series Double Rod Mini Cylinder MID16X25S
Delivering 86.4 N of thrust at 0.5 MPa in both directions, this AirTAC double-rod mini cylinder features a Ø6 mm piston rod exiting both end covers for perfectly symmetric force and built-in resistance to side loads. The through-rod design means the rear extension can independently trip a switch or push a secondary load without needing an external guide. Its stainless steel round barrel and riveted construction shrug off mild corrosion and washdown environments.
Because a rod occupies each side, the extend and retract areas are identical, yielding an equal 120.9 N at 0.7 MPa. The built-in magnet (-S) directly supports CMSG, DMSG, and EMSG position sensing, while the 1/8" port feeds air at speeds of 30-800 mm/s. For buyers sizing components, this bore provides a safe working load of about 52 N, capable of vertically lifting roughly 4.4 kg with a 2:1 safety margin.
Airtac MID Series Double Rod Mini Cylinder MID16X25S Technical Specifications
| Model | Airtac MID Series Double Rod Mini Cylinder MID16X25S |
|---|---|
| Series | MID ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MID Series Double Rod Mini Cylinder MID16X25S
| MID | ISO 6432 round-body mini cylinder (double-rod). |
|---|---|
| 16 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MID Series Double Rod Mini Cylinder MID16X25S Is Used
Symmetric Shuttle Transfer
Pushes a small workpiece carrier 25 mm left and right with equal 86.4 N force, using the twin rod to prevent twisting during the transfer.
Dual-End Switch Tripping
Drives a 4.4 kg vertical lift on the front rod while the rear rod extension directly trips a CMSG sensor flag, eliminating the need for separate mounting hardware.
Guided Pin Insertion
Presses a pin into a housing with a steady 52 N safe working load, relying on the through-rod construction to keep the tooling perfectly aligned without an external guide.
Is the Airtac MID Series Double Rod Mini Cylinder MID16X25S the Right Cylinder?
If your application requires less force, the MID12X25S offers 42.4 N at 0.5 MPa; stepping up to the MID20X25S provides 131.9 N. This Ø16 bore is an ideal middle ground, and its twin-rod architecture ensures steady, anti-rotation guiding for light jobs. The rear rod end is completely free to carry a mechanical stop or flag.
Position sensing is enabled by the -S magnet, allowing CMSG or DMSG switches to track travel. Mounting options include LB foot, FA flange, and TC trunnion brackets (the SDB pivot block is not compatible with double-rod models). Note that fixed TPU bumper pads only soften the stroke end; they do not lock the piston. If you need to hold a load vertically during air loss, add an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MID Series Double Rod Mini Cylinder MID16X25S FAQ
The force is equal both ways because a rod exits both ends. It delivers 86.4 N at 0.5 MPa, 120.9 N at 0.7 MPa, and a maximum theoretical force of 17.6 kgf at 1.0 MPa. The 1/8" port operates at speeds from 30-800 mm/s.
The twin rod resists rotation and side loads while providing a rear extension to drive a second load or trip a switch. The S suffix denotes a built-in piston magnet, which is required to mount CMSG, DMSG, or EMSG electronic position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MID Series Double Rod Mini Cylinder MID16X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.