Airtac MID Series Double Rod Mini Cylinder MID16X80
The AirTAC Airtac MID Series Double Rod Mini Cylinder MID16X80 is a genuine double acting, double rod round-body mini air cylinder with a Ø16mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper pads
About the Airtac MID Series Double Rod Mini Cylinder MID16X80
Delivering 86.4 N of thrust at 0.5 MPa, this 16 mm bore double-acting cylinder outputs equal force in both directions because a Ø6 mm piston rod exits both end covers. The through-rod geometry naturally resists rotation and side-load, providing steadier guiding for light fixtures without needing an external guide. This AirTAC MID16X80 features a stainless-steel round barrel and rod for mild washdown resistance, and it uses fixed TPU bumper pads to decelerate the stroke end.
Operating at speeds of 30-800 mm/s, the unit accepts a 1/8" air port and M6x1.0 male rod threads. Because it conforms to the ISO 6432 mounting interface, it drops directly into standard mini brackets and clevises. For sizing, this bore yields a safe working load of about 52 N, meaning it can vertically lift approximately 4.4 kg with a 2:1 safety margin. Note that this specific SKU lacks a magnet and cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MID Series Double Rod Mini Cylinder MID16X80 Technical Specifications
| Model | Airtac MID Series Double Rod Mini Cylinder MID16X80 |
|---|---|
| Series | MID ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MID Series Double Rod Mini Cylinder MID16X80
| MID | ISO 6432 round-body mini cylinder (double-rod). |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MID Series Double Rod Mini Cylinder MID16X80 Is Used
Symmetric Shuttle Transfer
Moves light jigs back and forth with 86.4 N of equal force, using the twin rod to keep the payload steady without twisting during transit.
Back-Rod Switch Trip
Uses the extended rear rod end to mechanically trip a limit switch or flag, confirming the 80 mm stroke position without needing an internal magnet.
Guided Push Assembly
Presses small components with a 52 N safe working load, relying on the dual-rod construction to resist side-load and prevent binding.
Is the Airtac MID Series Double Rod Mini Cylinder MID16X80 the Right Cylinder?
If 86.4 N at 0.5 MPa is too much force, step down to the MID12X80 which provides 42.4 N; if you need more push, the MID20X80 offers 131.9 N. The through-rod design is ideal when you need a back-rod end to trip a switch, carry a flag, or drive a second load simultaneously. You can mount this cylinder using LB foot, FA flange, or TC trunnion brackets, plus CA, U, R, or CM back covers, but the SDB pivot-block is not available on this double-rod variant.
Keep in mind that a plain cylinder does not hold its load on air loss or when a valve is centered, as the piston will drift and the bumper only softens the end of stroke. To suspend a load securely, install an external rod lock or a pilot-operated check valve. If you require position sensing, select the -S magnet variant to enable switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MID Series Double Rod Mini Cylinder MID16X80 FAQ
Because a rod exits both ends, the force is equal both ways: 86.4 N at 0.5 MPa, 120.9 N at 0.7 MPa, and a maximum theoretical output of 17.6 kgf at 1.0 MPa. It uses a 1/8" port.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. You would need the -S variant for position sensing. The stainless steel build and through-rod design provide excellent anti-rotation for guiding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MID Series Double Rod Mini Cylinder MID16X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.