Airtac MID Series Double Rod Mini Cylinder MID25X60
The AirTAC Airtac MID Series Double Rod Mini Cylinder MID25X60 is a genuine double acting, double rod round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
About the Airtac MID Series Double Rod Mini Cylinder MID25X60
Delivering 206.1 N of thrust at 0.5 MPa in both directions, the AirTAC MID25X60 is a double-acting, double-rod round-body mini cylinder. Because a rod exits both end covers, the extend and retract areas are identical, ensuring equal force while the twin-rod design naturally resists rotation and side loads for steadier guiding. The stainless-steel barrel and piston rod offer reliable mild corrosion and washdown resistance. This non-magnet SKU cannot host a sensor, though adding an -S magnet enables CMSG, DMSG, or EMSG switches.
Operating on filtered air at 30-800 mm/s, this Ø25 bore features a 1/8" port and M10x1.25 male rod thread. For practical sizing, the 206.1 N output at 0.5 MPa translates to a safe working load of roughly 124 N, or a vertical lift capacity of about 10.5 kg with a 2:1 safety margin. The back rod end remains free to trip a switch, carry a stop, or drive a second load. It conforms to the ISO 6432 mounting interface for standard mini brackets.
Airtac MID Series Double Rod Mini Cylinder MID25X60 Technical Specifications
| Model | Airtac MID Series Double Rod Mini Cylinder MID25X60 |
|---|---|
| Series | MID ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MID Series Double Rod Mini Cylinder MID25X60
| MID | ISO 6432 round-body mini cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MID Series Double Rod Mini Cylinder MID25X60 Is Used
Guided Push Mechanism
With 206.1 N of equal force both ways, the twin rod resists rotation to deliver steady, guided pushes for heavier jig and fixture actuation.
Symmetric Shuttle Transfer
Moving around 10.5 kg safely at 0.5 MPa, the dual rod ends are perfect for symmetrically shuttling parts between two workstations without external guides.
Back-Rod Stop Actuation
The rear protruding rod end trips a mechanical switch or acts as a secondary hard stop while the front rod drives the primary 60 mm tooling stroke.
Is the Airtac MID Series Double Rod Mini Cylinder MID25X60 the Right Cylinder?
When sizing this 60 mm stroke option, verify the 206.1 N @0.5 MPa force fits your payload; stepping down to the MID20 bore provides 131.9 N, while the larger MID32 offers 345.6 N. The through-rod architecture is ideal when you need anti-rotation stability, a back-rod stop, or symmetric shuttle movements. Note that fixed TPU bumper pads only soften the stroke end and do not lock the piston; if air pressure drops, the load drifts, so employ an external rod lock or pilot check valve for holding. Mount via LB foot, FA flange, or TC trunnion (SDB is unavailable), and select the -S version if position sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MID Series Double Rod Mini Cylinder MID25X60 FAQ
It delivers equal force both ways because a rod occupies each side: 206.1 N at 0.5 MPa, 288.5 N at 0.7 MPa, and a maximum theoretical force of 42.0 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa.
No, this specific SKU lacks a magnet and cannot accept CMSG, DMSG, or EMSG sensors. You must select the -S variant for sensing. The stainless steel round-body build resists mild corrosion, and the 1/8" port ensures robust airflow.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MID Series Double Rod Mini Cylinder MID25X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.