Airtac MID Series Double Rod Mini Cylinder MID25X60LB
The AirTAC Airtac MID Series Double Rod Mini Cylinder MID25X60LB is a genuine double acting, double rod round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
About the Airtac MID Series Double Rod Mini Cylinder MID25X60LB
Delivering 206.1 N of thrust in both directions at 0.5 MPa, the AirTAC MID25X60LB is a double-acting, double-rod round-body mini cylinder. Because a Ø10 mm piston rod exits both end covers, the extend and retract areas are identical, ensuring equal force while the twin-rod geometry naturally resists rotation and side loading. The stainless-steel barrel and rods withstand mild corrosion and washdown environments.
This 25 mm bore unit uses an ISO 6432 standard mounting interface for easy bracket integration and features a 1/8" port. Based on the 0.5 MPa output, it offers a safe working load of roughly 124 N, capable of vertically lifting about 10.5 kg with a 2:1 safety margin. Note this specific SKU lacks a magnet and cannot host position sensors.
Airtac MID Series Double Rod Mini Cylinder MID25X60LB Technical Specifications
| Model | Airtac MID Series Double Rod Mini Cylinder MID25X60LB |
|---|---|
| Series | MID ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MID Series Double Rod Mini Cylinder MID25X60LB
| MID | ISO 6432 round-body mini cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MID Series Double Rod Mini Cylinder MID25X60LB Is Used
Symmetric Shuttle Divert
Drives a 10 kg cart back and forth on a conveyor line, utilizing the equal 206.1 N force both ways for consistent bi-directional pushing.
Guided Stamping Press
Pushes a light assembly die with the front rod while the twin-rod construction resists rotational torque without needing an external guide rail.
Dual-End Stop Mechanism
Uses the rear exiting rod to trip a mechanical limit switch or carry a hard stop, synchronizing a secondary operation during the 60 mm stroke.
Is the Airtac MID Series Double Rod Mini Cylinder MID25X60LB the Right Cylinder?
When sizing this double-rod unit, consider the 206.1 N output at 0.5 MPa. If your application requires less force, stepping down to the MID20 bore provides 131.9 N, while moving up to the MID32 yields 345.6 N. The through-rod design is ideal for guiding loads without external rails, and the rear rod end is perfect for tripping a secondary switch or mounting a mechanical stop.
This model includes an LB foot mounting accessory but cannot use the SDB pivot block. Remember that fixed TPU bumper pads only decelerate the stroke end; they do not lock the piston. If air pressure drops, the cylinder will drift, so fit an external rod lock or pilot check valve for held loads. To add CMSG, DMSG, or EMSG sensors, you must select the -S magnet variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MID Series Double Rod Mini Cylinder MID25X60LB FAQ
Because it is a double-rod cylinder, the force is equal both ways: 206.1 N at 0.5 MPa, 288.5 N at 0.7 MPa, and a maximum theoretical output of 42.0 kgf at 1.0 MPa. It uses a 1/8" port.
No, this specific SKU does not include a magnet, so CMSG, DMSG, or EMSG switches cannot be used. You would need the -S variant for sensing. The stainless steel build resists mild corrosion, and LB foot mounts are included.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MID Series Double Rod Mini Cylinder MID25X60LB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.