Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B
The AirTAC Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
- BoreØ25 mm
- Max stroke10 mm
- Adjustable range0–10 mm
- Adjuster threadM8×1.25
- Port sizeM5×0.8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B
The B01-SDAJ25X10-10B is an AirTAC compact double-acting cylinder with an external adjustable extend stop. The B01- prefix marks this as an application-dedicated, customer-specified variant of the base SDAJ25X10-10B, meaning it is mechanically identical to the standard model but grouped for specific build requirements. It features a 25mm bore and a 10mm stroke.
An M8x1.25 adjuster screw lets you dial the extend end-position on the machine between 0 and 10mm without changing parts. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. Force equals a standard SDA of this bore, delivering about 245.4 N push at 0.5 MPa, and end shock is handled by a fixed NBR bumper rather than an adjustable air cushion.
Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B Technical Specifications
| Model | Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B Is Used
Trial Positioning
Dial the extend stop from 0 to 10mm to find the exact contact point during prototype tooling setup without machining new spacers.
Changeover Diverter
Fine-tune the stroke on a package routing gate to accommodate different carton sizes on the fly using the 245.4 N push force.
Short-Stroke Clamping
Secure delicate workpieces with a male M8x1.25 rod, adjusting the final 10mm extension to prevent over-travel damage.
Is the Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B the Right Cylinder?
Sizing this 25mm bore involves looking both ways: stepping down to SDAJ20 yields 157.1 N push at 0.5 MPa, while stepping up to SDAJ32 provides 402.1 N. With a safe working load around 147 N (60% of the 245.4 N figure) and a vertical lift capacity of roughly 12.5 kg with a 2:1 margin, this unit suits moderate actuation. It is ideal for setups requiring on-site stroke tuning. Confirm the 25mm bore, 10mm stroke, 10mm window, M5x0.8 port, male M8x1.25 rod thread, and lack of a magnet.
Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the stroke end. For a held load without live pressure, use an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–10 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M8×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B FAQ
The double-acting single rod provides 245.4 N push and 206.2 N pull at 0.5 MPa, 343.6 N push and 288.6 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
The B01- prefix denotes an application-dedicated customer-specified variant of the SDAJ25X10-10B, sharing identical specs. The M8x1.25 R screw shortens the extend stop by up to 10mm (usable 0-10mm); it sets the stop position and does not change force or lock mid-stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac B01-SDAJ Special Cylinder B01-SDAJ25X10-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.