Airtac B04-SAID ISO Standard Cylinder Dedicated for Construction Machinery B04-SAID100X200S
AirTAC B04-SAID100X200S Construction Machinery ISO Cylinder Specifications
- Model: B04-SAID100X200S
- Bore size: Ø100mm
- Stroke: 200mm
- Operating pressure: 0.05-1.0 MPa
- Cushion type: Adjustable air cushion (both ends)
- Temperature range: -20℃ to +80℃
- Mounting style: ISO 15552 standard front flange (optional rear flange)
- Port size: G1/2 (ISO 228/1)
- Seal material: Nitrile rubber (NBR) with wear-resistant ring
- Protection rating: IP65 (dust-tight & water jet resistant)
- Lubrication: Pre-lubricated (maintenance-free operation)
- Piston rod material: Chrome-plated carbon steel (S45C)
- Tube material: Anodized aluminum alloy
- Weight: 5.8kg ±2%
- Dimensions:
- Total length (extended): 445mm
- Body diameter: Ø125mm
- Flange diameter: Ø160mm
- Mounting hole spacing: 110mm (4×M10 threaded holes)
Heavy-duty ISO 15552 compliant cylinder engineered for construction equipment applications. Features triple sealing system with integrated scraper to prevent particulate ingress. The hexagonal tie-rod design provides 30% higher lateral load capacity compared to standard cylinders. Requires 5μm filtered compressed air with dew point -25℃ below ambient.
- Excavator bucket control mechanisms
- Concrete pump truck boom positioning
- Crane outrigger stabilization systems
- Pile driver impact energy regulation
- Road roller vibration unit actuation
Installation protocol:
Use M10 grade 8.8 bolts with anti-vibration washers for mounting.
Maintain minimum 0.5mm alignment tolerance during installation.
Perform initial 50-cycle test run at 0.3MPa before full pressure operation.
| Property | Property Value |
|---|---|
| sku | B04-SAID100X200S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.