Airtac B04-SAID ISO Standard Cylinder Dedicated for Construction Machinery B04-SAID32X50
AirTAC B04-SAID32X50 Construction Machinery ISO Cylinder Specifications
- Model: B04-SAID32X50
- Series: B04-SAID (Heavy-Duty Construction Series)
- Bore size: 32mm (ISO 6432 standard)
- Stroke: 50mm (±1.5mm tolerance)
- Operating pressure: 0.15–1.0 MPa
- Cushioning: Adjustable pneumatic cushion at both ends
- Mounting type: Basic front flange with rear foot mounting (ISO 15552 compatible)
- Piston rod material: Hard chrome-plated carbon steel (4Cr13)
- Tube material: Anodized aluminum alloy
- Seal material: High-grade NBR with wear-resistant ring
- Temperature range: -20℃ to 80℃ (with optional seals up to 120℃)
- Lubrication: Pre-lubricated (Oil-free operation possible)
- Port size: G1/8 (BSPP thread)
- Weight: 1.65kg (excluding accessories)
- Dimensions: 200mm(L) × 52mm(W) × 52mm(H) (full retracted length)
- Rod end thread: M12×1.25
- Protection rating: IP67 (standard wiper seal)
- Optional accessories: Magnetic sensor slot (for position detection), heat-resistant kit
Heavy-wall cylinder engineered for construction equipment vibration and shock loads. Features double-sealed rod gland with integrated scraper to prevent debris ingress. The reinforced mounting structure withstands lateral forces up to 30% of maximum thrust capacity. Requires minimum 5μm filtered air with automatic lubrication recommended for high-cycle applications.
- Excavator bucket control mechanisms
- Concrete pump truck gate actuators
- Pile driver clamping systems
- Crane outrigger positioning
- Road roller vibration unit controls
Installation note:
When used in vertical orientation, install rod-down position with moisture drain holes oriented downward.
Apply thread sealant to all pneumatic connections (PTFE tape not recommended).
Maximum side load capacity: 150N at full extension.
| Property | Property Value |
|---|---|
| sku | B04-SAID32X50 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.