Airtac B04-SAID ISO Standard Cylinder Dedicated for Construction Machinery B04-SAID40X100S
AirTAC B04-SAID40X100S Construction Machinery ISO Cylinder Specifications
- Model: B04-SAID40X100S
- Standard: ISO 15552 (VDI 2453)
- Bore size: 40mm
- Stroke: 100mm
- Operating pressure: 0.05-1.2 MPa
- Ambient temperature: -20℃ to 80℃
- Cushioning: Adjustable pneumatic cushion (both ends)
- Port size: G1/8 (ISO standard tapered thread)
- Piston speed: 50-750 mm/s
- Rod material: Hard chrome-plated steel (HCP)
- Tube material: Anodized aluminum alloy
- Seal type: HNBR seals (high temperature & oil resistant)
- Mounting type: Basic rear clevis (standard accessory)
- Weight: 1.8 kg (±5%)
- Dimensions (L×W×H): 240mm × 40mm × 40mm (extended length: 340mm)
- Protection rating: IP65 (rod seal area IP54)
- Lubrication: Pre-lubricated (Molykote 33M)
Heavy-duty ISO cylinder specifically engineered for construction equipment, featuring reinforced rod bearings and impact-resistant end caps. The double-sealed rod gland prevents contamination ingress in dusty environments. Includes wear-resistant guide bands for precise alignment under side load conditions.
- Excavator bucket positioning mechanisms
- Concrete pump truck outrigger controls
- Bulldozer blade adjustment systems
- Crane outrigger synchronization
- Pile driver hammer actuators
Installation note:
Requires 2°-5° downward tilt during mounting to prevent water accumulation.
Use anti-vibration brackets when installed on diesel-powered equipment.
Lubrication interval: 2,000km operation or 6 months (whichever comes first).
| Property | Property Value |
|---|---|
| sku | B04-SAID40X100S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.