Airtac B04-SAID ISO Standard Cylinder Dedicated for Construction Machinery B04-SAID50X500
AirTAC B04-SAID50X500 Construction Machinery ISO Cylinder Specifications
- Model: B04-SAID50X500
- Series: B04-SAID (Construction Machinery Special)
- Bore size: 50mm (ISO 6432 standard)
- Stroke: 500mm (adjustable cushioning)
- Operating pressure: 0.1-0.9 MPa
- Temperature range: -20℃ to 80℃
- Port size: G1/4 (ISO 1179-1 standard)
- Cushion type: Adjustable pneumatic cushion
- Mounting style: Front flange/Foot mounting (ISO 15552)
- Piston rod material: Hard chrome-plated steel
- Tube material: Anodized aluminum alloy
- Seal material: NBR (nitrile rubber) standard
- Rod end type: External thread M16x1.5
- Weight: 6.8kg (including mounting accessories)
- Dimensions: 730mm(L) × 70mm(W) × 70mm(H) (full extension)
- Protection rating: IP65 (dust-tight & water jet resistant)
- Lubrication: Pre-lubricated (Use ISO VG32 hydraulic oil if required)
Heavy-duty ISO cylinder engineered for construction equipment applications. Features double-acting operation with impact-absorbing aluminum end caps and anti-corrosion coating. The reinforced rod bearing design withstands lateral forces in mobile machinery. Requires 40μm filtered air with <0.5mg/m³ oil content.
- Excavator bucket control systems
- Concrete pump truck boom actuators
- Crane outrigger positioning mechanisms
- Road roller vibration control
- Mining equipment hatch operation
Installation note:
Maintain 0.5mm minimum alignment tolerance during mounting. Apply thread locker
(medium strength) to mounting bolts. Perform 30-minute run-in cycle at 0.3MPa
before full load operation.
| Property | Property Value |
|---|---|
| sku | B04-SAID50X500 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.