Airtac B04-SAID ISO Standard Cylinder Dedicated for Construction Machinery B04-SAID80X1000S
AirTAC B04-SAID80X1000S Construction Machinery ISO Cylinder Specifications
- Model: B04-SAID80X1000S
- Series: B04-SAID (ISO 15552 Standard)
- Bore size: 80mm
- Stroke: 1000mm
- Operating pressure: 0.1–1.0 MPa
- Cushioning: Adjustable pneumatic cushion (dual-side)
- Port size: G3/8 (ISO 1179-1 standard)
- Piston rod material: Chrome-plated steel (Ø25mm)
- Tube material: Hard anodized aluminum alloy
- Seal type: NBR (Nitrile) w/ wear-resistant ring
- Temperature range: -20℃ to 80℃
- Mounting type: ISO 15552 front flange (alternative mounts available)
- Weight: 12.8 kg (without accessories)
- Dimensions: 1145mm(L) × 100mm(W) × 100mm(H)
- Max piston speed: 0.1–1.5 m/s
- Lubrication: Pre-lubricated (recommended oil viscosity: ISO VG32)
- Protection rating: IP67 (rod extension area)
Heavy-duty ISO cylinder engineered for construction equipment, featuring reinforced rod bearings and triple-lip seals for dust/dirt resistance. The extended stroke design (1m travel) delivers high thrust force (theoretical 5024N at 0.6MPa) while maintaining precise linear motion. Includes shock-absorbing cushions to prevent end-impact damage during rapid cycling.
- Excavator bucket positioning systems
- Concrete pump truck boom actuators
- Drilling rig feed mechanisms
- Material handling gate controls
- Mobile crane stabilizer deployment
Installation guidelines:
Mount with ±0.2mm/m alignment tolerance. Use rod support brackets for strokes >500mm.
Apply 3-cycle manual operation after installation to distribute lubrication. Avoid side-load forces exceeding 200N.
| Property | Property Value |
|---|---|
| sku | B04-SAID80X1000S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.