Airtac B04-SAID ISO Standard Cylinder Dedicated for Construction Machinery B04-SAID80X450S
AirTAC B04-SAID80X450S Construction Machinery ISO Cylinder Specifications
- Model: B04-SAID80X450S
- Series: Heavy-duty ISO 15552 compliant
- Bore size: Ø80mm (3.15")
- Stroke: 450mm (17.72")
- Operating pressure: 0.1–0.9 MPa (14.5–130.5 PSI)
- Cushioning: Adjustable pneumatic cushioning (both ends)
- Port size: G3/8 (ISO 228-1 standard)
- Piston rod: Hard chrome-plated steel Ø25mm
- Barrel material: Anodized aluminum alloy
- Seals: HNBR (Hydrogenated Nitrile) for high temperature resistance
- Temperature range: -20℃ to +80℃ (-4°F to +176°F)
- Weight: 5.2kg (11.46 lbs) ±3%
- Dimensions: 638mm(L) × 100mm(W) × 100mm(H)
- Mounting: ISO 15552 mounting interfaces (front flange & rear foot)
- Protection rating: IP65 (dust-tight & water jet resistant)
- Lubrication: Pre-lubricated (relubrication interval: 2000km stroke)
High-torque cylinder engineered for construction equipment vibration and shock loads. Features reinforced rod bearing (bronze alloy) and impact-resistant end caps. Optional magnetic piston version (add "-M" suffix) for position feedback. Requires 5μm filtered compressed air with ISO VG32 hydraulic oil mist lubrication.
- Excavator bucket linkage systems
- Concrete pump truck boom positioning
- Crane outrigger stabilization controls
- Pile driver hammer mechanisms
- Rock crusher gate actuators
Installation note:
Mount with 0.1mm/m alignment tolerance. Use anti-vibration brackets (sold separately)
when installed on diesel-powered equipment. Perform stroke calibration after every
500 operating hours in high-dust environments.
| Property | Property Value |
|---|---|
| sku | B04-SAID80X450S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.