Airtac B04-SAID ISO Standard Cylinder Dedicated for Construction Machinery B04-SAID80X75
AirTAC B04-SAID80X75 Construction Machinery ISO Cylinder Specifications
- Model: B04-SAID80X75
- Series: B04-SAID (Construction Machinery Special)
- Standard: ISO 15552 (VDI 6432)
- Bore size: 80mm
- Stroke: 75mm
- Operating pressure: 0.05-1.2 MPa
- Temperature range: -20℃ to 80℃
- Cushioning: Double pneumatic cushion (adjustable)
- Mounting type: ISO 15552 square flange (4-hole pattern)
- Port size: G3/8 (ISO standard)
- Piston rod thread: M20×1.5
- Material: Aluminum alloy cylinder tube, stainless steel piston rod
- Seal material: NBR (Nitrile Butadiene Rubber)
- Protection rating: IP65 (dust-tight & protected against water jets)
- Weight: 5.2kg ±3% (excluding accessories)
- Dimensions: 375mm(L) × 80mm(W) × 80mm(H) (full extended length)
Heavy-duty ISO cylinder engineered for construction equipment applications. Features reinforced rod bearing for side load resistance and anti-rotation piston rod. The dual cushion design minimizes impact at stroke ends during high-speed operation. Pre-lubricated for immediate use with 40μm filtered air.
- Excavator bucket control mechanisms
- Concrete pump truck hydraulic assist systems
- Crane outrigger positioning
- Bulldozer blade adjustment
- Drilling equipment feed mechanisms
Installation note:
Ensure proper alignment of mounting surfaces (max 0.1mm/m misalignment tolerance).
Use locknuts with 25-35 N·m torque for rod-end connections. Lubricate every 2,000km of stroke
movement in high-dust environments.
Critical parameters:
Max lateral load 350N, axial load 1,800N. Not suitable for rotational speeds exceeding 0.5m/s.
Requires air lubricator when operating below 0.3MPa.
| Property | Property Value |
|---|---|
| sku | B04-SAID80X75 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.