Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X250S
AirTAC B04-SAUD100X250S Construction Machinery Cylinder Specifications
- Model: B04-SAUD100X250S
- Series: SAUD Construction Machinery Special
- Bore size: 100mm
- Stroke: 250mm
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable air cushion (both ends)
- Mounting type: SAU series standard square-end block
- Piston rod material: Chrome-plated steel (HTSR)
- Cylinder tube: Hard anodized aluminum alloy
- Seal type: Nitrile rubber (NBR) with wear-resistant ring
- Temperature range: -20℃ to 80℃
- Port size: G3/8 (BSPP thread)
- Weight: 9.8kg ±2%
- Dimensions: 550mm(L) × 128mm(W) × 128mm(H)
- Rod end thread: M36×1.5 (ISO metric)
- Protection rating: IP65 (dust-tight & water jet resistant)
Heavy-duty pneumatic cylinder specifically engineered for construction equipment applications. Features enhanced structural rigidity with double-layer chrome plating on piston rods and anti-impact buffer design. The square-end block mounting allows direct installation on machinery frames without additional brackets. Pre-lubricated with MOOGLUBE grease for extended maintenance intervals.
- Excavator bucket control mechanisms
- Concrete pump truck boom positioning
- Crane outrigger stabilization systems
- Pile driver impact dampening
- Road roller vibration unit actuation
Installation note:
Requires 5-10μm filtered compressed air with automatic drain.
For vertical mounting applications, use optional rod-end locknut (B04-LN36)
to prevent piston rod rotation. Lubricate every 500km of cumulative stroke
in high-dust environments.
| Property | Property Value |
|---|---|
| sku | B04-SAUD100X250S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.