Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S
The AirTAC Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1000mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1000 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S
The B04-SC100X1000S is an AirTAC double-acting tie-rod pneumatic cylinder engineered for heavy-equipment builders. The B04- prefix marks this as the construction-machinery dedicated variant of the SC100X1000S, meaning it is mechanically identical to the standard SC series but designated for robust applications.
Delivering 3927N of push force at 0.5MPa and up to 7068N at 0.9MPa, this unit handles substantial loads. It features a 25mm piston rod, PT1/2 ports, and a 1000mm stroke. The built-in S suffix magnet allows CMSG/DMSG/EMSG sensors to clamp directly onto the barrel for position detection.
Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S Technical Specifications
| Model | Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S Is Used
Excavator Actuation
Drives heavy auxiliary mechanisms on construction machinery where the B04 designation ensures suitability for rugged site environments.
Heavy Press Ejection
Provides 7068N of thrust at 0.9MPa to eject dense materials or parts from large industrial presses over a 1000mm travel.
Material Handling Diverters
Shifts large bulk material flows on heavy-duty conveying systems, utilizing the 1000mm stroke for wide lane transitions.
Is the Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S the Right Cylinder?
This 100mm bore offers 3927N push force at 0.5MPa. If your application requires less force, stepping down to an 80mm bore yields 2513N at 0.5MPa. For heavier demands, a 125mm bore provides 6136N.
At a 1000mm stroke, the unsupported 25mm rod is highly susceptible to bending under side loads. Use external guides or a guided cylinder to prevent rod-bearing damage. When replacing this unit, match the 100mm bore, 1000mm stroke, PT1/2 thread, basic mounting, and the built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S FAQ
This 100mm bore cylinder generates 3927N of push force at 0.5MPa and reaches 7068N at its 0.9MPa maximum operating pressure.
The B04- prefix indicates this is AirTAC's construction-machinery dedicated variant of the SC100X1000S. It is mechanically identical to the standard SC model, with no changes to dimensions, force, or seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.