Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD100X150S
AirTAC B04-SUD100X150S Construction Machinery Standard Cylinder Specifications
- Model Series: B04-SUD Construction Specialized Series
- Bore Size: 100mm (ISO 6432 standard)
- Stroke: 150mm (±1.5mm tolerance)
- Operating Pressure: 0.1-1.0 MPa (14.5-145 PSI)
- Cushioning Type: Adjustable hydraulic buffer (both ends)
- Mounting Style: Front flange with rear foot mounting (ISO 15552)
- Port Size: G3/8 (BSPP thread)
- Piston Rod Material: Hard chrome-plated carbon steel (Cr-Mo)
- Tube Material: Anodized aluminum alloy (AL6063-T5)
- Seal Type: HNBR (Hydrogenated Nitrile) with wear ring
- Temperature Range: -20℃ to 80℃ (dry air required below 0℃)
- Lubrication: Pre-lubricated (Relubrication interval: 3000km)
- Weight: 4.8kg (excluding accessories)
- Dimensions:
- Total Length (L): 287mm (at mid-stroke)
- Body Width (W): 118mm (mounting flange span)
- Height (H): 126mm (including mounting base)
- ISO Certification: 15552/PNEUROP VDMA 24562
Heavy-duty pneumatic cylinder engineered for construction equipment applications. Features triple sealing protection (rod wiper + primary seal + buffer seal) and corrosion-resistant surface treatment (SAC-E coating). The dual-guide rod design ensures stability under lateral loads up to 300N. Requires ISO 8573-1 Class 3-4-3 compressed air quality.
- Excavator bucket positioning mechanisms
- Crane boom locking systems
- Concrete pump truck hydraulic assist
- Drilling rig feed force control
- Pile driver impact dampening
Installation Note:
For vertical mounting applications exceeding 45° inclination, install auxiliary rod-end support brackets.
Maintain 0.5-1mm/mm alignment tolerance during installation. Initial run-in requires 50-100 low-pressure cycles.
| Property | Property Value |
|---|---|
| sku | B04-SUD100X150S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.