Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD100X175S
AirTAC B04-SUD100X175S Construction Machinery Cylinder Specifications
- Model: B04-SUD100X175S
- Series: B04-SUD (Construction Machinery Special)
- Bore size: Ø100 mm
- Stroke: 175 mm
- Operating pressure: 0.05-1.0 MPa
- Temperature range: -20℃ to 80℃
- Cushioning type: Adjustable buffer at both ends
- Port size: G1/2 (ISO228/1 standard)
- Material:
- Cylinder tube: Aluminum alloy hard anodized
- Piston rod: Chrome-plated steel (Cr-Mo steel base)
- End caps: High-grade cast iron
- Seal material: NBR + PU combination
- Weight: 8.7 kg (dry, without accessories)
- Dimensions:
- Total length: 377 mm (at mid-stroke)
- Body diameter: Ø117 mm
- Mounting base: 165×165 mm square flange
- Rod end thread: M30×1.5
- IP rating: IP65 (dust-tight & water jet protected)
- Lubrication: Pre-lubricated (maintenance-free for 3,000 km operation)
Heavy-duty pneumatic cylinder specifically engineered for construction equipment applications. Features reinforced rod bearings and triple-lip rod seals for extreme load conditions. The multi-stage buffering system minimizes impact forces during full-stroke operation (up to 0.8 m/s piston speed). Corrosion-resistant construction withstands hydraulic fluid exposure and outdoor weathering.
- Excavator bucket control mechanisms
- Concrete pump truck boom positioning
- Drilling rig feed systems
- Crane outrigger stabilization
- Asphalt roller vibration control
Installation note:
Requires 500-hour greasing interval (use ISO VG32 hydraulic oil).
For vertical mounting, install rod-end down to prevent condensate accumulation.
Not recommended for continuous rotation applications exceeding 15 RPM.
| Property | Property Value |
|---|---|
| sku | B04-SUD100X175S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.