Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X350S
AirTAC B06-SAID100X350S Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SAID100X350S
- Series: B06 (Battery Application Series)
- Bore size: Ø100mm (3.94")
- Stroke: 350mm (13.78")
- Operating pressure: 0.05-0.7 MPa
- Cushioning: Adjustable pneumatic cushion
- Material: Aluminum alloy barrel, hard chrome-plated piston rod
- Mounting: Standard ISO 15552 foot & flange (NFPA optional)
- Position sensing: Built-in magnet for sensor mounting
- Sensor type: Compatible with reed switches (M12 connector)
- Weight: 2.8kg (6.17lb) ±5%
- Dimensions: 450mm(L) × 125mm(W) × 125mm(H)
- Temperature range: -20℃ to 80℃
- Air lubrication: Oil-free operation capable (0.5μm filtered air recommended)
- Cycle rate: ≤3 m/s piston speed
- ISO certification: ISO 6432/15552 compliant
High-efficiency pneumatic cylinder specifically engineered for battery-powered systems, featuring ultra-low friction seals (X-ring design) and optimized air consumption. The double-acting design incorporates a wear-resistant guide bushing and IP67-rated sensor slots. Includes corrosion-resistant mounting hardware and meets ISO mounting dimensions for easy retrofitting.
- Mobile battery-operated AGV lifting mechanisms
- Solar panel tracking systems
- Electric forklift clamping controls
- Portable medical ventilator actuators
- Off-grid automation equipment
Installation protocol:
For vertical installations exceeding 45° angle, use supported rod-end bearings.
Maintain 0.1-1.0 MPa working pressure for optimal seal performance. Lubricate monthly
with ISO VG32 hydraulic oil if using non-lubricated air systems.
Critical note:
Requires 2-stage filtration (5μm + 0.3μm) when used in lithium battery production
environments to prevent particulate contamination.
| Property | Property Value |
|---|---|
| sku | B06-SAID100X350S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.