Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID100X900
AirTAC B06-SAID100X900 Battery-Optimized ISO Cylinder Specifications
- Model: B06-SAID100X900
- Series: B06-SAID (Battery Application Series)
- Bore size: 10mm (ISO 6432 standard)
- Stroke: 900mm (adjustable cushioning)
- Operating pressure: 0.05–1.0 MPa
- Operating temperature: -10℃ to 70℃
- Port thread: M5×0.8 (standard) / G1/8 optional
- Piston speed: 50–800 mm/s
- Seal material: Heat-resistant NBR + Dust-resistant wiper
- Rod material: Stainless steel (SUS304) with hard chrome plating
- Weight: 2.8kg ±5% (with mounting brackets)
- Dimensions: 940mm(L) × 42mm(W) × 42mm(H) (full extension)
- Repeat positioning accuracy: ±0.5mm
- Protection rating: IP67 (enhanced dust/water resistance)
- Lubrication: Pre-lubricated (maintenance-free for 3,000km operation)
High-efficiency pneumatic cylinder specifically engineered for battery-powered automation systems. Features ultra-low friction design (≤0.015 dynamic friction coefficient) to minimize energy consumption in mobile equipment. Integrated magnetic sensor groove (M5x0.5 thread) enables position feedback compatibility. Anodized aluminum barrel prevents corrosion in humid environments.
- Lithium battery production line handling robots
- AGV (Automated Guided Vehicle) lifting mechanisms
- Solar panel tracking systems
- Portable medical device actuators
- EV charging connector positioning units
Installation guidelines:
Requires 15mm alignment tolerance for full stroke operation.
Use only with filtered dry air (40μm/5μm recommended).
For vertical mounting, apply external guide mechanism when load moment exceeds 2.5N·m.
| Property | Property Value |
|---|---|
| sku | B06-SAID100X900 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.