Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X350
AirTAC B06-SAID32X350 Battery-Powered ISO Cylinder Specifications
- Model: B06-SAID32X350
- Series: B06-SAID (Battery ISO Standard)
- Bore size: 32mm (ISO 6432 compliant)
- Stroke: 350mm ±1.5mm tolerance
- Operating pressure: 0.05–0.8 MPa
- Battery type: Integrated 24V DC lithium pack
- Battery life: 50,000 cycles @ 1Hz operation
- Max thrust: 480N @ 0.6MPa
- Speed range: 50–800mm/s
- Weight: 1.8kg (including battery)
- Dimensions: 400mm(L) × 50mm(W) × 50mm(H)
- Rod thread: M12×1.25
- Seal material: HNBR with wear-resistant rings
- Temperature range: -20℃ to 80℃
- Position detection: Built-in magnetic sensor slot
- Protection rating: IP67 (dust/water resistant)
- Lubrication: Pre-lubricated (maintenance-free for 5,000km)
Self-contained pneumatic actuator with integrated power system, designed for mobile automation solutions requiring ISO-standard performance without fixed air supply. Features smart power management with auto-sleep mode after 30 minutes idle. The aluminum alloy barrel undergoes multi-stage anodizing for corrosion resistance.
- Mobile robotic material handling systems
- Portable medical equipment actuators
- Solar-powered agricultural gate controls
- Emergency shutdown mechanisms in off-grid facilities
- Automated guided vehicle (AGV) clamping units
Installation note:
Requires monthly battery status checks via built-in LED indicator (green=normal,
yellow=30% remaining, red=recharge). For vertical mounting,
ensure rod-end down position to prevent particulate accumulation.
Recharge via waterproof USB-C port (5V/2A input).
| Property | Property Value |
|---|---|
| sku | B06-SAID32X350 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.