Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID50X25S
AirTAC B06-SAID50X25S Battery-Specific ISO Cylinder Specifications
- Model: B06-SAID50X25S
- Type: ISO 6432 compliant single-acting spring return cylinder
- Bore size: 50mm (standard metric series)
- Stroke: 25mm (adjustable ±1mm)
- Operating pressure: 0.05–1.0 MPa
- Temperature range: -20℃ to 80℃
- Mounting style: SAID series basic profile with 4x M5 tapped holes
- Cushioning type: Fixed air cushion + rubber buffer
- Rod end: External M10x1.25 male thread
- Material: Aluminum alloy barrel (hard anodized), CR12MoV piston rod
- Seal material: Heat-resistant NBR with dust wiper
- Weight: 0.68kg ±2% (without accessories)
- Dimensions:
- Body length: 136mm (retracted)
- Stroke length: 25mm
- Overall width: 63mm (mounting face to rod end)
- Port size: G1/8 (dual ports)
- IP rating: IP54 (standard), IP67 optional
- Lubrication: Pre-lubricated (Grease-free operation available)
High-precision ISO cylinder optimized for battery manufacturing environments, featuring anti-corrosion treatment and low-friction seals. The nickel-plated piston rod resists electrolyte splashes, while the dual-port design enables rapid response (0.3s full stroke time at 0.5MPa). Includes magnetic sensor slots for position feedback integration.
- Lithium battery module compression/press fitting
- Battery terminal welding fixture actuation
- Automated battery cell sorting systems
- EV battery pack assembly line positioning
- Energy storage system safety lock mechanisms
Usage guidelines:
Maintain air quality at ISO 8573-1:2010 Class 2.3.2 (max 5mg/m³ oil content).
For vertical mounting, install rod-end down to prevent particulate accumulation.
Cycle rate should not exceed 80% of maximum 200 cycles/min in continuous duty.
| Property | Property Value |
|---|---|
| sku | B06-SAID50X25S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.