Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID80X200
AirTAC B06-SAID80X200 Battery-Optimized ISO Cylinder Specifications
- Model: B06-SAID80X200
- Type: ISO 15552 compliant single-acting pneumatic cylinder (spring return)
- Bore size: 80mm (±0.02mm tolerance)
- Stroke: 200mm (adjustable with stroke limiter)
- Operating pressure: 0.15–0.8 MPa (21.7–116 PSI)
- Temperature range: -20℃ to +80℃ (continuous operation)
- Cushioning: Adjustable air cushion at both ends
- Port size: G3/8 (BSPP thread)
- Mounting: ISO mounting pattern with 160mm center distance
- Rod material: Hard chrome-plated stainless steel (SUS304)
- Tube material: Anodized aluminum alloy (AL6063-T5)
- Seal type: HNBR seals with low-friction design
- Protection rating: IP65 (dust-tight & water jet resistant)
- Weight: 3.8kg ±2% (without accessories)
- Dimensions:
- Extended length: 474mm
- Retracted length: 274mm
- Body diameter: 95mm
- Rod diameter: 25mm
High-efficiency cylinder specifically engineered for battery-powered pneumatic systems, featuring reduced air consumption (30% less than standard models) through optimized seal geometry. The dual-chamber buffer system minimizes end-impact noise below 65dB(A). Includes anti-rotation guide slots for precise linear motion control.
- Lithium battery cell stacking machines
- Cleanroom semiconductor handling robots
- Mobile EV battery pack assembly lines
- Explosion-proof environments (ATEX Zone 2 compatible)
- Solar panel lamination presses
Installation note:
Requires minimum 5μm filtration. For vertical mounting, use spring-down orientation.
Lubricate with ISO VG32 grade oil if not using oil-free systems. Stroke adjustment
requires 17mm hex wrench (included). Allow 20mm clearance for cushion adjustment screws.
| Property | Property Value |
|---|---|
| sku | B06-SAID80X200 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.