Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD100X800S
AirTAC B06-SAUD100X800S Battery-Powered Standard Cylinder Specifications
- Model: B06-SAUD100X800S
- Type: Double-acting pneumatic cylinder (battery system compatible)
- Bore size: 100mm
- Stroke: 800mm
- Operating pressure: 0.05–1.0 MPa
- Temperature range: -10℃ to 80℃
- Voltage compatibility: DC12-24V (optimized for battery systems)
- Battery endurance: 500,000 cycles @ DC12V
- Rod material: Hard chrome-plated steel
- Tube material: Anodized aluminum alloy
- Seal type: HNBR with wear-resistant design
- Cushioning: Adjustable air cushion at both ends
- Weight: 9.8kg ±5% (without mounting accessories)
- Dimensions: 1060mm(L) × 130mm(W) × 130mm(H)
- Mounting options: Basic type (ISO 15552 standard)
- Position detection: Magnet embedded (PNP/NPN sensor compatible)
- Protection class: IP67 (dust/water resistant)
Specialized pneumatic actuator engineered for battery-operated systems, featuring ultra-low friction design (≤0.08 dynamic friction coefficient) and optimized energy consumption. Incorporates anti-corrosion treatment for humid environments and maintenance-free operation up to 5,000km stroke travel. Requires lithium-based grease lubrication every 3 million cycles.
- Mobile AGV material handling systems
- Off-grid solar tracking mechanisms
- Electric vehicle battery assembly lines
- Portable medical equipment actuators
- Autonomous warehouse robotics
Installation note:
Maintain 0.5-1mm alignment tolerance during mounting. Use copper-based anti-seize compound
on threaded parts when operating below -5℃. Battery terminals require monthly contact resistance check.
Critical parameters:
Minimum 10.5V DC required for full torque output. Avoid continuous operation beyond 70% duty cycle
in vertical mounting orientation. Maximum side load: 280N at mid-stroke.
| Property | Property Value |
|---|---|
| sku | B06-SAUD100X800S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.