Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD40X50
AirTAC B06-SAUD40X50 Battery-Optimized Standard Cylinder Specifications
- Full model: B06-SAUD40X50
- Series: B06-SAUD (Battery Application Series)
- Bore size: 40mm (1-9/16")
- Stroke: 50mm (2")
- Operation type: Double-acting
- Working pressure: 0.05-1.0 MPa (7-145 PSI)
- Cushion type: Adjustable pneumatic cushion
- Port size: G1/8 (ISO228/1 standard)
- Temperature range: -20℃ to 80℃ (-4°F to 176°F)
- Rod material: SUS304 stainless steel
- Tube material: Aluminum alloy with hard anodization
- Seal material: NBR + PU hybrid seals
- Weight: 1.85kg (4.08 lbs)
- Dimensions (L×W×H):
- Retracted length: 162mm (6.38")
- Extended length: 212mm (8.35")
- Body width: 53mm (2.09")
- Mounting height: 40mm (1.57")
- Corrosion resistance: IP67 (MIL-STD-810G salt spray tested)
Specialized pneumatic cylinder engineered for battery manufacturing/assembly processes. Features anti-electrolysis coating and spark-resistant construction for safe operation near lithium batteries. Integrated magnetic sensor slot (M9 connector compatible) enables position feedback. Low-friction design maintains consistent speed under 0.3MPa minimum pressure.
- Lithium battery cell stacking machines
- EV battery module compression systems
- Battery terminal welding fixtures
- Energy storage system assembly lines
- Autonomous guided vehicle (AGV) battery swap mechanisms
Operation guidelines:
Use dry air (dew point -20℃ or below) with 5-40μm filtration.
Lubricate with ISO VG32 turbine oil if manual lubrication required.
Avoid lateral loads exceeding 30N during mounting.
| Property | Property Value |
|---|---|
| sku | B06-SAUD40X50 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.