Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD40X600
AirTAC B06-SAUD40X600 Battery-Powered Standard Cylinder Specifications
- Model: B06-SAUD40X600
- Series: SAUD (Battery Special Series)
- Bore size: 40mm
- Stroke: 600mm
- Action type: Double-acting
- Cylinder material: Aluminum alloy tube with hard anodized surface
- Piston rod material: Stainless steel (SUS304) with chrome plating
- Seal material: Heat-resistant NBR (Nitrile Rubber)
- Operating pressure: 0.1-0.9 MPa
- Temperature range: -20℃ to +80℃
- Cushioning: Adjustable pneumatic cushion (both ends)
- Port size: Rc1/4 (NPT1/4 optional)
- Mounting type: Basic type (Standardized mounting accessories available)
- Weight: 3.5kg ±5% (without battery pack)
- Dimensions: 750mm(L) × 58mm(W) × 58mm(H) (Fully extended)
- Rod thread: M12×1.25
- Protection rating: IP54 (Standard sealing)
- Max theoretical output: 490N @0.63MPa
High-efficiency pneumatic cylinder specifically engineered for battery-operated systems, featuring optimized air consumption and low-friction design. The integrated energy recovery system captures residual kinetic energy during deceleration to extend battery life. Includes corrosion-resistant coatings for harsh environments and magnetic piston for position sensing compatibility.
- Mobile battery-powered AGV lifting mechanisms
- Solar panel tracking systems
- Portable medical equipment actuators
- Outdoor automated agricultural machinery
- Energy-efficient packaging line diverters
Installation note:
Requires minimum 0.5m flexible tubing between cylinder and battery pack.
Lubricate with ISO VG32 hydraulic oil if operated below -10℃.
Avoid lateral loads exceeding 50N during mounting.
- Air consumption: 1.13L/cycle @0.5MPa
- Max speed: 500mm/s (With cushioning engaged)
- Battery compatibility: 12-24V DC systems
- Service life: 5,000km travel distance (under standard load)
| Property | Property Value |
|---|---|
| sku | B06-SAUD40X600 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.