Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X225S
AirTAC B06-SAUD63X225S Battery-Optimized Standard Cylinder Specifications
- Model: B06-SAUD63X225S
- Series: SAUD (Battery Application Special)
- Bore size: 63mm
- Stroke: 225mm
- Operating pressure: 0.05–0.8 MPa
- Temperature range: -20℃ to 80℃
- Cushioning: Adjustable pneumatic cushion
- Port size: M5x0.8 (Dual ports on both ends)
- Piston speed: 50–800 mm/s
- Seal material: NBR + Polyurethane composite
- Mounting type: Basic type (Standard foot mounting)
- Sensor compatibility: Built-in magnet for reed switch (Pre-wired 2m cable optional)
- Weight: 2.45 kg ±3%
- Dimensions:
- Total length: 323mm (Stroke 225mm + End caps)
- Body diameter: 80mm
- Mounting center spacing: 50mm × 50mm
- Protection rating: IP54 (Dust protected, water splashed)
- Lubrication: Pre-lubricated (Maintenance-free for 3,000km stroke)
Energy-efficient pneumatic cylinder specifically engineered for battery-powered systems, featuring ultra-low starting friction (≤0.8N) and optimized air consumption. The anodized aluminum construction with chromium-plated piston rod ensures corrosion resistance in humid environments. Includes auto-bleed valves for vertical installation.
- Mobile battery-operated AGV lifting mechanisms
- Solar tracking system actuators
- Portable medical oxygen concentrators
- Robotic welding battery swap stations
- Off-grid renewable energy control systems
Installation note:
Requires 0.5Nm torque for mounting bolts. For vertical mounting,
install exhaust mist separator when stroke exceeds 150mm.
Lubricate guide shafts every 500,000 cycles in high-usage scenarios.
| Property | Property Value |
|---|---|
| sku | B06-SAUD63X225S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.