Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S
The AirTAC Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 900mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke900 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
About the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S
The B06-SAUD63X900S is an AirTAC double-acting, double-rod profile cylinder. The B06- prefix marks it as the battery-manufacturing dedicated variant of the SAUD63X900S, sharing identical mechanics. It yields 1402 N of force each way at 0.5 MPa via a 3/8 inch port. The twin rods prevent twist during transit.
This extruded aluminum body is shorter than an equivalent ISO 15552 unit. The -S suffix enables CMSG or DMSG sensors on the rear rod. At 0.5 MPa, expect a safe working load near 841 N and a vertical lift capacity of roughly 71 kg with a 2:1 margin. Viton H seals allow 0-150 C heat.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S Technical Specifications
| Model | Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S Is Used
Cell Stacking
Drives prismatic cell stacking arms with equal push and pull force to maintain precise alignment.
Module Handling
Transfers battery modules on a conveyor without rotation thanks to the dual guide rods.
Tab Welding
Positions busbar tabs for laser welding using the rear rod cam to trigger the cycle.
Is the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S the Right Cylinder?
When sizing this 63 mm bore, note the 1402 N equal force. Step down to a 50 mm bore for 825 N, or up to an 80 mm bore for 2268 N. Choose this twin-rod layout for anti-rotation, twin-tool, or rear-cam sensing. Mounting uses SC-series FA or LB blocks. The 900 mm stroke demands external guides to prevent rod bending. The -S magnet allows electronic tracking.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S FAQ
The B06- prefix denotes the battery-manufacturing dedicated variant of the SAUD63X900S, with identical specs. Force is equal both ways: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. It uses a 3/8 inch port.
No, the adjustable cushions only decelerate the piston near stroke end. For load holding on air loss, you must fit an external rod lock or pilot-operated check valve. The cylinder will drift if pressure is removed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD63X900S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.