Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50
The AirTAC Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 50mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke50 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50
The B06-SAUD80X50 is an AirTAC battery-manufacturing dedicated variant of the SAUD80X50 double-rod profile cylinder, mechanically identical to the base model. The B06- prefix simply designates its industry use, retaining the 80mm bore, 50mm stroke, and 3/8" port. Because a rod exits both ends, the push and pull force is equal at 2268 N each way at 0.5 MPa. The extruded aluminum profile is shorter than a standard ISO 15552 cylinder of the same bore.
This symmetric design provides anti-rotation guidance and allows a sensor cam to mount on the back rod, though this specific SKU lacks the -S magnet and cannot take a switch. The 0.5 MPa output yields a safe working load of roughly 1361 N, capable of a 116 kg vertical lift with a 2:1 margin. For high-temperature assembly cells, Viton H seals extend operation to 150 C.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50 Technical Specifications
| Model | Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50 Is Used
Cell Stacking
Drives synchronized pressure plates during prismatic cell stacking, ensuring perfectly parallel electrode alignment without rotation.
Module Transfer
Lifts and lowers heavy battery modules with equal push and pull force, carrying twin gripper tools for bidirectional pick and place.
Tab Welding
Provides stable clamping for busbar tab welding, using the rigid double-rod profile to resist offset welding forces.
Is the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50 the Right Cylinder?
Select this 80mm bore when your battery module handling requires 2268 N of equal force both ways. Step down to the 63mm bore for 1402 N, or up to the 100mm bore for 3681 N. The double-rod architecture is ideal for twin-tool driving or non-rotating lifts. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Since this is a no-S SKU, it cannot accept CMSG or DMSG sensors. With a 50mm stroke, side-load guide requirements are minimal, but external load guides are always recommended for stable travel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50 FAQ
The B06- prefix marks this as a battery-manufacturing dedicated variant of the SAUD80X50, mechanically identical to the standard cylinder. The 80mm double-rod design yields equal force both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. It uses a 3/8" port and M20x1.5 rod threads.
No. This SKU lacks the -S magnet, so it cannot accept magnetic switches. Additionally, a plain cylinder drifts on air loss; the 28mm adjustable cushions only decelerate near stroke end. For vertical battery module lifting, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.