Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X600
AirTAC B06-SAUD80X600 Battery-Powered Standard Cylinder Specifications
- Model: B06-SAUD80X600
- Type: Double-acting pneumatic cylinder with integrated battery module
- Bore size: 80mm
- Stroke: 600mm (±0.5mm tolerance)
- Operating pressure: 0.05–1.0 MPa
- Battery type: 3.6V lithium-thionyl chloride (Li-SOCl₂)
- Battery life: ~100,000 cycles @ 1Hz operation
- Temperature range: -30℃ to 85℃ (operation), -40℃ to 100℃ (storage)
- Cushioning: Adjustable pneumatic cushion at both ends
- Rod material: Hard chrome-plated steel (HCP)
- Tube material: Anodized aluminum alloy (A6063-T5)
- Seal material: HNBR with wear-resistant ring (RW1000)
- Weight: 4.5kg ±5% (including battery)
- Dimensions: 800mm(L) × 120mm(W) × 120mm(H) (extended length)
- Mounting: ISO 15552 standard
- Protection rating: IP54 (dust protected & water splashed)
- Response time: ≤0.5s (0.5MPa pressure)
Self-contained pneumatic actuator with emergency power backup, designed for environments without continuous power supply. Features low-temperature optimized seals and anti-corrosion coating, with wireless signal compatibility through optional RF module (2.4GHz/433MHz). Includes built-in pressure sensor for battery life monitoring.
- Mobile solar panel positioning systems
- Emergency shutdown mechanisms in oil/gas facilities
- Automated warehouse retrieval systems
- Agricultural irrigation control gates
- Disaster response equipment actuators
Installation note:
Requires 15° maximum misalignment compensation. For vertical mounting,
use additional guide mechanism when payload exceeds 25kg. Replace battery
when LED indicator blinks red (typical lifespan 3-5 years).
| Property | Property Value |
|---|---|
| sku | B06-SAUD80X600 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.