Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S
The AirTAC Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 900mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke900 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S
The B06-SAUD80X900S is an 80 mm bore, 900 mm stroke double-acting double-rod profile cylinder. The B06- prefix marks this as AirTAC's battery-manufacturing dedicated variant, mechanically identical to the standard SAUD80X900S. It features an extruded aluminum barrel that is shorter than an ISO 15552 cylinder of the same bore. A rod protrudes from both ends, giving equal push and pull force of 2268 N each way at 0.5 MPa.
This twin-rod design provides anti-rotation guidance and lets the back rod carry a sensor cam. The -S suffix means a built-in magnet for CMSG/DMSG/EMSG switches. Operating speed is 30-800 mm/s on a 3/8 inch port. The 2268 N output yields a safe working load of about 1361 N, lifting roughly 116 kg vertically with a 2:1 margin. Viton H seals can raise the -20 to 70 C range to 150 C.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S Technical Specifications
| Model | Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S Is Used
Cell Stacking Alignment
Uses the equal both-ways force and anti-twist guidance to press and align prismatic battery cells precisely during module stacking.
Pack Transfer Carriage
Drives dual transfer arms on a battery pack assembly line, using the second rod to trip a rear position switch.
Electrode Handling Lift
Raises and lowers electrode carriers with a 116 kg vertical lift margin, maintaining parallelism without rotation.
Is the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S the Right Cylinder?
Size both ways: the 63 mm bore gives 1402 N, while the 100 mm bore yields 3681 N, both equal in both directions at 0.5 MPa. Choose this 80 mm double-rod when you need strict anti-rotation, twin-tool driving, or back-end switch actuation. Mounting uses basic, FA flange, or LB foot styles compatible with the AirTAC SC series. The -S magnet enables position sensing. Because the stroke is 900 mm, external guides are recommended to prevent rod bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S FAQ
The B06- prefix designates this as the battery-manufacturing dedicated variant of the SAUD80X900S, sharing identical specs. Force is equal both ways: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. It uses a 3/8 inch port.
No, a plain double-rod cylinder drifts without live air; the adjustable 28 mm cushions only decelerate near stroke ends. For vertical load holding on a battery line, add an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD80X900S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.